It rolls on composite eight-inch wheels that are lightweight and maintenance free. Also features padded armrests for added safety and a nylon upholstered seat for extra comfort. The nylon upholstery is comfortable, lightweight and easy to clean.
Maintenance tips: – At least once a week, wipe off chrome using a clean soft cloth – If the chair is exposed to moisture, dry the chair immediately – The metal parts of the chair should be polished once a month with an auto wax – Clean the upholstery with a mild soap solution, rinse and wipe dry – Worn or torn upholstery should be replaced promptly as it may not support your body weight – Inspect the wheels at least once a month – Correct any side play by loosening the lock nut on the axle, then tighten the axle just enough to remove side play – Solid rubber tires require limited upkeep, but need to be cleaned periodically with a damp cloth – Solid rubber tires need to be replaced if they become cracked or severely worn
Safety tips: – Before entering or leaving the chair, engage the dual wheel locks against the tires on both rear wheels – Make sure the front casters are in the forward position before transferring into or out of the chair – Do not move forward on the seat while leaning forward out of the chair – If it is absolutely necessary to do so, make sure the front casters are in the forward position – If you are picking an object up from the floor, go past the object and then go backwards – The casters will then swing to the forward position – Leaning out of the transport chair without proper assistance could cause tipping – Do not step on the foot plates when transferring, as this could cause tipping
Operating Tips: – Your Transport Chair Dealer (Wheelchair rental Dealer) can assist you in making adjustments and provide you with operational information – To Open the chair, tilt to one side and push down on seat rails – Lift back support to upright position – The lock to secure the back will engage automatically – To fold down and store, pull up on locks simultaneously, and carefully fold down the back support – To attach footrests, align the holes on the footrest arm with the pegs on the frame of the Transport chair – To Adjust the length of the footrests, loosen the bolt (or knob) on the telescoping tube shaft – Tighten securely after adjustment – The lowest part of the footrest should not be less than 2 1/2 inches from the ground to permit proper clearance